激光切割作为一种精密的加工方法，几乎可以切割所有的材料，包括薄金属板的二维切割或三维切割。

激光系统发出的光波长对眼睛有害，所以必须采取护眼措施。

强烈建议进行有关适当的系统操作和安全的综合培训。很多操作工都没有使用光纤激光切割的切割经验，所以应通过对操作光纤切割系统进行好的初始培训来弥补缺乏的经验。

虽然激光切割擅长切割大部分材料，但是其不能用于切割丙烯酸类或聚碳酸酯类材料，而且仅能切割有限应用领域中的木质或纤维材料。

同时，对于确定何时使用激光切割加工来说，要切割材料的厚度是一项很重要的因素。

As a precise machining method, laser cutting can cut almost all materials, including two-dimensional cutting or three-dimensional cutting of thin metal plates.

The wavelength of light emitted by the laser system is harmful to the eyes, so eye protection measures must be taken.

Comprehensive training on proper system operation and safety is strongly recommended. Many operators have no cutting experience in using optical fiber laser cutting, so they should make up for their lack of experience through good initial training in operating optical fiber cutting system.

Although laser cutting is good at cutting most materials, it can not be used to cut acrylic or polycarbonate materials, and can only cut wood or fiber materials in limited applications.

At the same time, the thickness of the material to be cut is a very important factor for determining when to use laser cutting.